![]() ![]() | |||
To clean with Tergo Microfiber cleaning cloths, use only water. No chemicals. Use the cloths dry for dusting and buffing and slightly dampened for surfaces you would normally use cleaning solutions on. For best results, rinse the cloth under hot tap water prior to your first use to open up the pores. Remember, no cleaning solutions are required. Clean the surface of your choice and that's it! In several seconds the surface will be perfectly clean and dry. Because no chemicals are needed when using the Tergo Microfiber Cleaning Cloth, no residue will remain on the cleaned surface. Note: Avoid making the cloth too wet to eliminate streaks. For mirrors or glass, you may prefer to spray water on the surface and wipe it dry.
Washing Instructions
To help preserve the environment, we recommend rinsing the cloths after each use and wash only once they become soiled. Machine wash in hot water with laundry detergent or hand wash with dish soap in warm water (Do not exceed 175º). Rinse thoroughly. Air-dry or put in dryer on low heat (Do not exceed 190ºF). It's best to use environmentally-safe detergent if possible.
Each Tergo Microfiber cleaning cloth is specially developed for a specific type of surface. Refer to individual product specification for recommended usage instructions. |
||||||||
© 2005-2006 Daldmar Enterprises. All rights reserved.
|
||||||||